Auto Inflatable Wristband Manufacturers

Marine Lifejacket, (MarineChildLifejacket), suitable for life-saving use of all types of people on ocean coasts and inland rivers. The buoyancy of the lifejacket is greater than 113N after being immersed in the water for 24 hours, and the loss of buoyancy of the lifejacket should be less than 5%. Life jacket buoyancy material: polyethylene foam. The new marine life jacket is a new life jacket designed and manufactured in accordance with the requirements of IMOMSC207 (81) and MSC200 (80). The specification was implemented on July 1, 2010.

The safety clothing should be selected according to the weight and height. Persons with a weight of 43 kg and a height of 155 cm and above should wear adult life jackets. Persons with a weight of less than 43 kg and a height of less than 155 cm should choose the corresponding child safety clothing.

Rocket Parachute Flare Signal is a distress signal that can be hung under a parachute and continue to burn for a certain period of time after it is launched into the air to a certain height, and emits a red light with a certain luminous intensity and descends at a slow speed.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

When you are in distress at sea, a reliable inflatable life raft may be the last hope for survival. In recent years, with the development of technology, the design of life rafts no longer only meets the basic buoyancy requirements, but pays more attention to the humanized experience, making the escape process safer and more comfortable. The following are several innovative highlights of the new generation of inflatable life rafts:

Now that the economy is developed, all kinds of transportation are available. However, for passengers on ships, most of them are basically unaware of the role of life-saving equipment on board and some safety knowledge.