Flame Signals Manufacturers

Choose a life jacket

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

Australian Prime Minister Turnbull was photographed on the 27th local time without taking a life jacket when he was on an inflatable boat. He was fined 250 Australian dollars (about 1271 yuan) for violating local laws.

When using a throw-and-drop life raft, the raft and the storage tank can be thrown directly into the water together. The life raft can be automatically inflated and formed for people in distress to ride. If the ship sinks too fast to throw it into the water, when the ship sinks to a certain depth, the hydrostatic pressure release device on the raft will automatically unhook, release the life raft, and the life raft will surface and automatically recharge. Bulging.

Most falling water accidents are sudden, and water rescue is actually a race against time. In an emergency, when a person falls into the water or is trapped in a flood disaster, the prime time for water rescue is only a few minutes. Both the person falling into the water and the rescuer need to understand the correct use of the lifebuoy in order to rescue more quickly.

Swimming with a life jacket is ideal for those learning how to swim or individuals swimming in lakes, oceans and rivers, since swimming in these areas can be more dangerous than swimming in a pool. A life jacket can protect you from waves and rapid currents as well as keep you safe if you become fatigued. Due to the bulkiness of a life jacket, you will need to ensure a proper fit of the life jacket before attempting to swim. While swimming with a life jacket you can opt to use your arms, legs or both.