Life Jackets Air Inflation Manufacturers

A pneumatic thrower is a high-efficiency material-propelling system that uses compressed air to accelerate and project materials at controlled speeds and trajectories. It is widely used in industrial manufacturing, mining, recycling, agriculture, laboratory testing, quality control, impact simulation, and automated handling lines. The purpose of this equipment is to deliver consistent throwing force, high repeatability, and reliable long-term operation without excessive maintenance.

Australian Prime Minister Turnbull was photographed on the 27th local time without taking a life jacket when he was on an inflatable boat. He was fined 250 Australian dollars (about 1271 yuan) for violating local laws.

Yesterday at midnight, a ferry sank in the Persian Gulf waters near Bahrain, 150 passengers and crew were all drowned, Bahrain rescuers and the US Navy's 5th fleet were dispatched. As a result, more than 60 were rescued and 44 bodies were recovered. By the time the newspaper finished this morning, the rescue operation is still going on.

As early as 2016, the “Titanic 2” built by the Australian mining giant Clive Palmer’s Blue Star Cruises has been exposed, and the interior is almost identical to its prototype.

The life raft uses the sling launching device on the ship and is inflated and formed on the outer side of the ship. After the passengers have taken in, they will be lowered to the sea surface.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.