Adjustable Anti-Collision Safety Manufacturers

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

In the hot summer days, many people choose to swim as a way to cool off.

Marine Lifejacket, (MarineChildLifejacket), suitable for life-saving use of all types of people on ocean coasts and inland rivers. The buoyancy of the lifejacket is greater than 113N after being immersed in the water for 24 hours, and the loss of buoyancy of the lifejacket should be less than 5%. Life jacket buoyancy material: polyethylene foam. The new marine life jacket is a new life jacket designed and manufactured in accordance with the requirements of IMOMSC207 (81) and MSC200 (80). The specification was implemented on July 1, 2010.

The weight of Inflatable Waistband is no more than 0.6kg. This light weight makes the inflatable belt cause almost no additional load pressure to the user during daily carrying. Whether it is for leisure activities such as boating and swimming or for daily outings, it can be easily worn around the waist without causing any burden, greatly enhancing the convenience of carrying.

Australian Prime Minister Turnbull was photographed on the 27th local time without taking a life jacket when he was on an inflatable boat. He was fined 250 Australian dollars (about 1271 yuan) for violating local laws.

The life raft uses the sling launching device on the ship and is inflated and formed on the outer side of the ship. After the passengers have taken in, they will be lowered to the sea surface.