Life Jacket

Marine Work Life Jacket: Made of high-strength waterproof material, similar to the principle of inflatable lifebuoy or swimming ring. Divided into automatic inflatable or passive inflatable.

The safety clothing should be selected according to the weight and height. Persons with a weight of 43 kg and a height of 155 cm and above should wear adult life jackets. Persons with a weight of less than 43 kg and a height of less than 155 cm should choose the corresponding child safety clothing.

The maritime department organizes relevant business departments every year to inspect the ship’s smoke signal flares. In addition, general ocean navigation ships must be equipped with 6 hand-held pyrotechnic sticks, 4 orange smoke flares, and 12 parachute flares. So, what is a smoke signal?

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

1. The surface of the life jacket is mostly made of water-resistant and air-permeable materials. In addition to paying attention to the buoyancy parameters, the fisherman should also pay attention to whether there is any damage to the crotch interface and so on to prevent gravity-free floating after entering the water. 2. Generally, there is a pair of oval luminous bodies on the chest or shoulders of life jackets. They are mainly used for rescue at sea to find the target. Therefore, you should pay attention to whether to seam when choosing, and then consider its color and fabric.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand)